Maxtor Computer Drive NAS 4000 Series User Manual

MaxAttach NAS 4000 Series Quick Start Card

Thank you for choosing a Maxtor MaxAttach™ NAS 4000 Series file server. Take a moment to verify the

contents in your box and note the serial number of your MaxAttach for future reference. The procedures out-

lined here assume that you are familiar with networking and system administration basics. If not, please refer to

the Installation and Configuration Guide on the enclosed MaxAttach NAS 4000 Series CD.

Box Contents

•

MaxAttach NAS 4000 Series file server

Quick Start Card

MaxAttach NAS 4000 Series End User License Agreement

Power cord

CAT-5 Ethernet cables (2)

Mounting ears (2) with screws

Rubber feet (4)

MaxAttach NAS 4000 Series CD containing:

•

MaxNeighborhood™ Setup and Discovery Wizard

MaxAttach NAS 4000 Series documentation

•

1Safe™ for MaxAttach client backup software CD

Unit Information

Please record the following information:

Model Number:________________________________

Serial Number:_________________________________

System Requirements

It will be necessary for your workstation to have the following:

•

Windows 95/ 98/ Me/ NT(SP5)/ 2000

Internet Explorer v5.01 SP1 or above

Network Interface Card (NIC)

Client for Microsoft Networks enabled over TCP/ IP

CD-ROM Drive